Pipe Floats for Industrial Water Lines and Floating Pipeline Support

Two-Half Clamp Design – You can place both float sections around the pipe and secure them with bolts, reducing assembly work on long pipeline sections.

Rotomolded Polyethylene Body – Your float receives a seamless shell with reliable resistance to impact, moisture, sunlight, and changing outdoor temperatures.

Optional Closed-Cell Foam Core – You can select a foam-filled pipe float when your project requires additional flotation retention after localized surface damage.

Matched Inner Diameter – The internal profile can be produced around your pipe size to improve contact and reduce unnecessary movement during operation.

Distributed Pipeline Buoyancy – You can arrange the floats at engineered intervals to control freeboard, pipe bending, and load concentration.

Reinforced Bolt Locations – Thickened fastening areas help your float withstand repeated tightening and working loads during installation.

Hardware Selection – You can choose galvanized or stainless-steel bolts according to freshwater, coastal, or long-term outdoor conditions.

Custom Identification – Colors, molded logos, serial numbers, project codes, and visible markings can be added for easier asset management.

You can use these Pipe Floats for water transfer pipelines in reservoir water supply, river-crossing pipelines, municipal water projects, industrial cooling-water systems, mine-water management, water intake lines, discharge pipelines, and temporary water delivery networks.

For processing and resource projects, your floats can support slurry pipeline flotation systems, tailings transport lines, mineral-processing water pipelines, and floating pump installations. Their modular structure allows you to extend, relocate, or reconfigure the line when your operating area changes.

You can also install them in aquaculture water circulation systems, hydropower facilities, environmental water-management projects, coastal infrastructure, and marine pipeline support applications. Whether your pipeline carries water, slurry, or another approved medium, the float system helps you maintain a controlled position on the water surface.

These marine pipe support floats are suitable for water-resource engineering, mining, mineral processing, industrial manufacturing, municipal infrastructure, hydropower, aquaculture, environmental management, coastal construction, and floating pumping projects.

They can also support EPC contractors, pipeline installers, water-system operators, engineering companies, and distributors looking for a reliable floating pipe buoyancy solution for permanent or temporary installations.

What are pipeline floats?
Pipeline floats (also known as dredge floats or buoyancy modules) are devices attached to discharge pipes to keep them afloat on water.

How do I calculate how many floats I need for my pipeline?

You need to ensure total buoyancy exceeds total weight. Calculate the combined weight of the steel/pipe itself + the weight of the material inside (e.g., slurry/water) + accessories. The floats should provide at least 20-30% more buoyancy than this total weight to keep the pipeline floating properly (usually with 1/4 of the pipe diameter above water).

How long is the warranty period ?

The warranty period shall commence on the date the Buyer hands over the goods to the Investor and shall terminate upon the earlier of the following two dates: eighteen (18) months from the date of handover by the Buyer, or twelve (12) months from the date of installation.

Are these floats suitable for seawater use?
Yes, absolutely. Polyethylene (PE) is highly resistant to saltwater corrosion, UV radiation, and chemical erosion. They are actually preferred over steel floats in marine environments because they never rust.